Feed Press
Feed presses are supplied and installed for poultry and livestock feed factories with different production capacities according to the required production capacity.


Cooler
- Supply & installation of coolers of different electrical capacity
- The radiator is made of galvanized iron and electrostatically painted to protect against rust.
- The radiator body is 10 mm thick sheet with a hardness of 52 in accordance with international standards
Crumbler
- Egyptian German Industrial Solutions offers the finest types of shredders with European specifications and German technology
- Motor: Italian made
- The shredder is made of galvanized iron and electrostatically painted to protect against rust


Hammer Mill
It is a machine for crushing and crushing materials in the form of granules to the size to be produced.
It is used in various production lines, including construction and food.
The idea of the mill is based on entering the materials to be crushed from a hole at the top, which is matched by a cylinder that rotates at high speeds (1400 - 3000) with knives (hamers) installed that crush them to the required size, which is determined by the speed and the diameter of the holes from which the product comes out.
There are many models, each with different characteristics that depend on the field in which we will work, the required capacity, and the shape of the product.
Rotation in both directions.
Finished Product Tanks
- The Egyptian-German company manufactures all tanks for the final product of feed with a welding system or a high-resistance bolt assembly system.
- The tank includes the installation chassis.
- The tank is made of galvanized iron.
- The tank is ribbed and the tank is dismantled and installed.
- The degree of iron hardness is 52 according to international standards.


Filling Machines
- It consists of a 25 kg sacks packing machine.
- We offer the best packaging machines with a production capacity of up to 15 tons / hour.
- The machine contains a weight reading device made by the Italian company Lomas.
- Curtain sewing machine.
- Sewing machine stand.
- Walk 3 meters below the filling machine.
Silos
Grain storage silos
Supply and installation of silos with different capacities


Mixer
The mixer is usually made of iron or stainless steel.
The use of the mixer is not limited to a specific field, but rather it is used in any industry that needs to be increased.
The homogeneity of raw materials such as feed, mills, food industries in general, and others.
The idea of the mixer is based on entering the raw materials into a closed basin with the possibility of adding liquids inside it, and the raw materials are stirred through rotating arms or a spiral until the homogenization process is completed to the required degree, after which the mixer unloads the raw materials from the bottom through a gate.
The mixing time ranges from 90: 180 seconds.
Belt Conveyor
It is used to quickly transfer services and load them on trucks.


Drum Sieve
It is equipment used to classify raw materials and products.
It is a rectangular body with maintenance doors and inside it a rotating cylinder that is managed by means of a pole connected to an electric motor.
The sieve mechanism is based on the passage of raw materials from inside the cylinder to exit from holes with graduated diameters of approximately 2:40 mm.
It works without vibration compared to the vibrating screen.
Due to the low relative speed and smoothness of the product, it reduces the crushing process.
Less energy consumption, high efficiency with high production capacity, less maintenance as well as its ease - less noise - longer service life.
Sometimes an air system is used to increase the capacity and efficiency of the sieve.
Back Filter
Egyptian German Industrial Solutions offers filter units of different capacities according to the productivity of the used mill
- Contains 40 syrups
- The body of the Back Filter is made of 10 mm thick sheet, with a hardness of 52 ", according to international standard specifications.
- The mill is made of galvanized iron and electrostatically painted to protect against rust.

Airlock
It is one of the auxiliary equipment that is used in the air transport system (pneumatic) and in systems that need to control the entry and exit of air, such as crushers. There are several models of it that are mainly classified based on cyclones and filters.
The airlock consists of a rotating gate that takes out the materials and allows only a little air to pass with them.
required capacity.
Especially in the feed production line.
Screw Conveyor
It is used to transport raw materials horizontally and relatively inclined.
It is a cylinder with a rotating spiral inside it.
It has a circular maintenance hole at the top.
It is characterized by accuracy, so it is used in case of need for stability and high accuracy in feeding.
Usually used in medium and small capacities.
Its life span is comparatively less than that of the pelvic auger
Tanks
Storage units (raw materials - finished product) and they have several forms according to the materials to be stored and the required capacity.
Tanks are made of (iron - stainless - concrete - plastic - and others ..........)
These tanks are usually either cylindrical, square or rectangular
Bucket Elevator
The wheel is one of the means used to transport raw materials and grains.
The waterwheel is characterized by the transportation of raw materials with large capacities up to heights of approximately 50 meters.
The waterwheel is characterized by low operating and maintenance costs, in addition to the low electrical energy required to operate it.
The wheel is the ideal solution for vertical transportation.
The transportation process is carried out by hoppers that carry the raw materials vertically by means of a pulley at the top and bottom, between which there is a leather belt or a chain, and the management process is carried out by means of an electric motor equipped with an electric brake system to prevent rotation in the reverse direction in the event of a stop.
The capacity of the wheelbarrow is determined by the number of turns of the rotating bobbin and the size and number of hoppers per metre, which in turn are determined by the length and width of the wheelbarrow case.
The hopper used in the waterwheel may be made of metal or plastic
Cyclone
It is a cylindrical body mostly made of light iron or stainless steel. It is used inside the transmission system and air cleaning units. It may also be used before dust filters if the amount of impurities is higher than the filter can absorb. The idea of the cyclone is based on the entry of air full of impurities from the side of the cyclone, and it collides with the inner body and descends to the bottom, where the impurities are withdrawn with the help of an airlock, and the air free of impurities rises to the top from the exit hole of the cyclone. The cyclone is not usually used as a stand-alone filtration unit. The size and shape of the cyclone is determined by the capacity of the air to be drawn, measured in cubic metres.
Cylinder Jet Filter
Filters are used in many fields and in different forms, the main objective of which is to purify the air or increase tahe capacity of some equipment. Its role is based in a simple way on the passage of the materials to be purified through a fabric with holes that are determined according to the size and type of material of the product passing through it and the impurities to be removed. Filters are widely used inside factories, and the issue here is not related to luxury, but rather the topic is very important, as the impurities present are among the most common causes of fire in factories. Cylindrical filters are usually used here, and they are connected to the places to be purified by air suction (fan). The diameters of the pipes are calculated according to the distance and the amount of air passing through them. Poultry and livestock have different production capacities according to the required production capacity.
Chain Conveyor
The pallet is one of the common means of transporting raw materials. The pallet is characterized by low operating and maintenance costs, in addition to the low electrical energy required to operate it. Pallets are the ideal solution for horizontal transportation. The brackets consist of two sides, a floor, and a cover that together form a square shape, and a chain runs through it with Teflon wings and iron that pushes the products in the required direction. The chain runs on a forward gear and a rear gear connected to a motor through grains horizontally and obliquely up to 22 degrees. The pallet is characterized by the transportation of raw materials with large capacities and long distances up to approximately 40 meters. management column. The capacity of the truck is determined by the size of the square in which the products run, the size of the wing installed on the track, the number of turns, and whether the truck is horizontal or inclined.
Feeder
It is a special equipment for feeding and the most common type of feeders is the barrel or rotary system, and each type has characteristics that distinguish it from the other.
The barrel system is characterized by accuracy and helps to mix the product, so it uses the highest scales and pistons.
As for the rotary system, it is used in systems that need a large area to distribute the product, such as crushers and crushers.
Slide Gate
It is a knife that moves on rollers back and forth in the direction of locking and unlocking.
Its parts are dismantled and assembled.
The movement is carried out by means of a pneumatic piston. The size of the piston is determined based on the size and size of the gate
The piston is controlled by an electric solenoid valve with side angles to ensure the lowest leakage rate. The gate is placed below and above the outlets of tanks and conveyors.
In some models, an electric motor with a reducer is used instead of a piston
Dosing Scale
It is a small tank usually made of iron or stainless steel. A weight is placed at the bottom of the factories’ raw materials tanks. Its outlet is closed from the bottom with gates, and it is often fed through barrels from the top. Its role is limited to the weight of raw materials and products. It has many sizes, the most commonly used are 1000 kg and 2000 kg. Its fulcrums are weight cells with the required capabilities connected to the PLC unit that controls the weight calibration.
